Brand New Honeywell 5800MINI Wireless Slim Contact 5811 Replacement, Battery Mag

Description

Brand New Honeywell 5800MINI Wireless Slim Contact 5811 Replacement, Battery Magnet Included
The Honeywell Wireless Door/Window Contact is equipped with a magnetic field indicator that illuminates when a magnet comes within range of the sensor. This removes all guesswork of magnet placement as now, for the first time, an installer can see the magnetic gap and no longer has to rely on the chime of a control panel.
The 5800MINI provides all of the advantages of Honeywell’s field-proven, quick-install 5800 Series wireless devices, with the addition of signal transmission and low-battery LED indicators. It virtually disappears when installed and blends with any décor, making it ideal for applications where aesthetics are critical such as ornate doors, casements and double-hung windows. The 5800MINI provides a single zone of protection and installs easily on doors or windows with the included double-sided adhesive tape.
Sensor Dimensions
:  1″ W x 2.2″ H x 0.25″ D  (25.4mm x 55.9mm x 6.4mm)
Magnet Dimensions
:  0.25″ x 0.25″ x 1″  (6.4mm x 6.4mm x 25.4mm)
Power Source
:  3V Lithium battery (supplied)
Gap
:  1″ (25.4mm) make distance
Case Tamper Protection
:  Case
Operating Temperature
:  32°F to 122°F  (0° C to 50°C)
Transmit Frequency
:  345 MHz
Compatibility
:  Compatible with all 5800 Series
Wireless devices Agency Listings
:  FCC, IC
What’s in the box
• 5800MINI transmitter with magnet • CR2032 battery • 3M mounting tape • Installation instructions
The Honeywell 5800mini is a compact door/window transmitter that can be used with the
Lynx Plus L3000
,
Lynx Touch L5210
,
Lynx Touch L7000
or the
Honeywell Vista 15P
and
Honeywell Vista 20P
that have an attached wireless receiver. These have built-in signal transmission and low-battery LEDs so that you can see when it’s working and when you need to change the batteries out.
The transmitter measures in at a miniscule 1″ W x 2.2″ H x 0.25″ D and the magnet measures 0.25″ x 0.25″ x 1″. These make for an excellent choice for those who have installations where a bulkier contact would be too much. These are powered by a CR123 3 volt lithium battery and the batteries have a 2 to 3 year life expectancy before you have to change them. The 5800mini transmitters run on the 345 MHz frequency just as the rest of the Honeywell 5800 series wireless devices do. The LEDs of this device have different meanings. The blue LED helps to ensure proper magnet placement. The green LED means that the transmitter is transmitting. The red LED lets you know that the battery is getting low and needs to be changed.
The Honeywell wireless devices, on average, get you a 200′ radius for placement and if you need a wider area or a stronger signal then you can add the Honeywell 5800RP Repeater to the system to push this even further. Honeywell wireless devices are superb if you have to install other sensors and you don’t have the ability to run wire. They make a wide range of devices for burglary detection including door/window contacts, motions and glassbreaks and wireless keypads and remotes. Not only do they provide wireless burglary detection, but you can get devices that can be used to monitor environmental conditions such as fire, flooding and temperature.